toyota celica rear suspension

Answers and questions: toyota celica rear suspension

TOYOTA YARIS swap for 2zz-ge

does anyone know what would be needed to make the swap other than the engine would the ECU need to replaced Im sure there are loads of compatiblity issues does anyone know what they are

knock sensor under the intake manifold. It is actually easier to install than to take off. You can do it with the engine on the car if you can fit your hands behind the manifold. Loosening the alternator will make things easier.) -ECU from 2ZZGE or PowerFC. If you get an ECU from 2ZZGE and not a PFC it should better be 2000 or 2001 which they have a higher rev limiter at 8400 rpms. More at newcelica.org.

knock sensor under the intake manifold. It is actually easier to install than to take off. You can do it with the engine on the car if you can fit your hands behind the manifold. Loosening the alternator will make things easier.) -ECU from 2ZZGE or PowerFC. If you get an ECU from 2ZZGE and not a PFC it should better be 2000 or 2001 which they have a higher rev limiter at 8400 rpms. More at newcelica.org.

MAZDA 6 I GG GY speed 6 rear end assembly

alright guys i havean 04 mazda 6 v6 and im in the process of making it a show winner along with a drift toy in one but anywho im making the car rear wheel only and with out wanting to go thru more customization of another rear end i was thinking of using the stock speed 6 rearend assembly and beef that up instead since there should already be all the mounting holes on my car already so my question

Money can create anything. I saw an episode of Tuner Transformation and they changed a toyota Paseo (old school two door FWD) and made it RWD because the owner wished he could do drifting. They took the drive line out of a toyota pick up truck and solid rear axle. The fuel tank was changed to a fuel cell type. Everything else had to be custom fabricated as well as moving the steering rack rearfront

View Rear suspension for TOYOTA CELICA

TOYOTA YARIS Can a Yaris be Sporty

Hey Im a new member. Im thinking about purchasing a used Yaris hatch but I have a lot of questions... My goal for my next car is to get something sporty with good gas mileage great reliability and under 6000. Ideally the car will have under 80000 miles on it. The Yaris fits this bill as do some other cars. The reason Im buying another car is because my current car a 1991 toyota celica requires quite

I own a 92 celica GT as well as 5 Yaris. I definitely understand the sports car feel of the celica but I think my Supercharged Yaris is actually more fun to drive. The one thing that really differentiates the celica from the Yaris is the independent rear suspension. If we could figure out how to transfer that to the Yaris I would never look back.

TOYOTA YARIS Raceland Coilovers

Ok..So I know there was a thread while back about trying out Raceland coils. Now I have done some research..or observations. lol The 7th Gen celica coils on their website looks identical setup that our Front suspension is setup like. Now I wonder if I could get the front coils from the 7th gen celica and the rear setup for a 1st gen xb.. Maybe an Idear.. lol Or dumb I am very innovative and like playing.

FORD F150 Suspension lift choices

I am trying to figure out what method of lifting my (being built soon) new f150 4x2. I want to put it up to about the stock 4x4 height and I am curious of an inexpensive way to do this. I would prefer not to use a body lift because I dont care for the way that they look. I dont mind the ride getting a little more truckish but I dont want to feel like I am off-roading on the highway. I have looked at

Crazey Ill see If I can remember the directions. 1 Jack up front of truck. 2 Remove Tire 3 Remove Brake caliper. 2 bolts on each 4 Remove Rotor by knocking out center and undoing nut. 5 un-do bolt holding the Upper A-arm to the spindle. 6 un-do bolt holding spindle to lower A-arm. 7 Un-do bolt holding Tie rod to spindle. 8 Hit spindle with a downward motion with a hammer and it should drop to floor then remove spindle from lower A-arm. 9 Re-move lower Ball Joint ( Boy This Was Fun Tip rent a ball joint puller from Autozone ) 10 Install New ball Joint ( Mine Went in upside down but they may have changed this ) 11 Put new spindle on lower A-arm 12 Re-attach upper A-arm 13 Re-attach Tie Rod 14 Grease Spindle Rod 15 Put rotor back on 16 Put brake caliper back on 17 Put wheel back on 18 Install Blocks in rear 19 Get Truck Aligned Now I mave have left somethings out. So check out this link httpwww.bullseyeindustries.comin...directions.htm Any Questions Took me like 5-6 hours but I could do in like 4 now that I no how. BTW Im NOT a mechanic ------------------ 98 F150 2WDBright Red Regular Cab 4.2 3.55 5 Speed Superchip 2 Superchip Decals (I Think They Add 5 HP Each) 3 Inch Bullseye Lift Spindles Manik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 2 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. And Coming Soon 3 Inch Body Lift Kit 16.5 x 9.75 American Racing Baja Wheels Wrapped With 35x12.5x16.5 BFG All Terrains 00 toyota celica GT( Wifes Car ) Pics httpwww.angelfire.comla2ccla

FORD F150 Looking for a 2wd suspension dealer.

I live in New Orleans area and i am looking for a highly qualfied 2wd suspension lift shop around me distance does not matter.I have the fabtech 3 12 performance kit that i installed myselfbut now i want the fabtech spindles and this project is out of my league. so any information is helpful thanks ------------------ 97 f-150 XL 4.2L V6 standerd cab short bed 5 speed 3 12 Fabtech performance kit 16X9

Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

TOYOTA TACOMA New LR UCA SPC bushing started squeaking after only a few miles

i literaly just finished installing my new spec ride LR UCA bushings on my tacoma and the squeak disapeared for all of a couple miles then returned just as bad as it was before with the old bushings. anyone have an idea why this is happening

I dont have these bushings so I am just speaking from general experience with rubber suspension bushings (my old celica has a 4-link rear suspension and panhard rod 10 bushings in all with a specific procedure for torqueing them down). When you tighten the bolts with the vehicle lifted when you drop the vehicle the suspension compresses and the bushings can twist if there is too much pressure on them.

MAZDA 6 I GG GY Lower Rear Tie Bar

while browsing around eBay like a do I stumbled across this. httpcgi.ebay.comebaymotors03-04-05-06...1QQcmdZViewItem A craptastic eBay Lower rear Tie Bar. Remember that DC decided not to make ours I was debating buying it just to see how well it worked and if it is a POS like I believe it to be I&39ll replace the part(s) that are causing the problem. Until I read this. Quote FITS 00-05 toyota celica

TOYOTA CAMRY III 91 Camry Front Brakes

I just purchased a 91 camry dx and im looking to do some upgrades with the brakes. Is it true that 91 celica brakes fit the 91 camry Also can the rear disc brakes from a 91 celica fit a 91 camry with drum brakes This ad is not displayed to registered members. Register your free account today and become a member on Camryforums

NISSAN JUKE Anyone Totally satisfied with owning the Juke

Look. The internet opens the flood gates to all walks of life. There seems to be many people here that are having frustrating comments about their new 20k ish purchase and also quite a few that are enjoying the hell out of it. Just wanted to get a feel of peoples general age and or history of automobiles before this car and how they feel in comparison to the Juke.. I have been driving an automobile

by wife to sell Year 1973 - San Jose California 1972 Plymouth Duster (wifes car) purchased new 2 door chocolate brown with light tan snake skin vinyl roof automatic 318 engine traded for 1972 Buick Riviera Year 1974 - San Jose California 1956 Oldsmobile Rocket 88 (my car) two tone red & white 4 door automatic V8 paid 90 ran for 8 months sold for 25 scrap Year 1974 - San Jose California 1969 toyota

FORD FIESTA New member possible future ST owner

Hi everyone Name is Tom 29 years old.married with 2 boys. From Toledo oh This forum has been a great source of information and convinced me this is what I want. As much as it makes me sick to my stomach thinking about replacing my current car 1993 toyota celica GT convertible. It might be time to break up had her for just over 9 years and this winter has taking its toll on my girl. rear suspension

PONTIAC SOLSTICE Soltice Coupe Vs. Lotus Elise

Guys Other than collectibility (lets face it Im not a collector) what are the key arguments in favor of Coupe vs. Elise. Assume price is not a factor as there are reasonably priced Elises out there. This one for example Cars for Sale 2006 Lotus Elise in CHATTANOOGA TN 37421 Convertible Details - 294355682 - AutoTrader.com

Quote Originally Posted by RedDevil Coupe GXP is faster. Lotus uses the same engine as the toyota celica GT-S. 180HP with VVT. Not fast enough to out run any GXP turbo. Not exactly acccurate. I have owned 3 Elises all normally aspirated a normally aspirated Exige and a factory supercharged Exige. Currently own a Solstice Coupe. Sold my Exige S last fall after 2 years ownership. The comparison between

FORD F150 Lift questions from a newbie...

Howdy all just picked up at 97 4x2 F-150 Supercab. For appearance purposes only Id like to lift it and add somewhat larger wheelstires of the all-terrain type. Trying to decipher the difference between suspension lifts (ie Fabtech) body-lifts spindle lifts etc. Very confused Dont want to spend a fortune. Also I like the AR Outlaw rims. When lifted what sizetype of tire and rim is recommended. Many thanks in advance Gary

ALRIGHT EVERYBODY STAND BACK Let The Expert Talk Crazey you have 3 options. The First Two are considered suspension lifts. The Last Option is a Body Lift. First Spindle Lift - You Replace the Factory Spindle With one from Bullseye industries. Lifts front 3. Youll also need to lift the rear An inch or so with Blocks. Mine cost around 600.00 and took like 5-6 hours to do. Pretty easy in my opinion. Second A-Arm Lift- Replace the Factory Coil Springs and Upper A-Arms. Two Companies I know of make them. One is Fabtech motorsports the second is California Super Trucks. Lifts the front 3.5. Youd need to lift the rear also. Blocks again. Cost- between 800-1000. Depending on where you get. ( Cheapest Ive seen is Summit racing ) I dont have this one ( YET )so I cant give any details on instalation time or ease. Third Body Lift- Lifts the body off the frame either 2 or 3 depending on which kit you buy. I have the performance products 3 lift. Not installed yet. Cost- 130.00. Install time- Ive heard it takes like 12-15 hours and Is a total pain. In Conclusion You can use any of these lifts indepentantly or in conjunction with any other componet. Mix And Match or do all 3 for 9.5 of lift. The Spindles or A-arms will allow for 33s. Any More s ------------------ 98 F150 2WDBright Red Regular Cab 4.2 3.55 5 Speed Superchip 2 Superchip Decals (I Think They Add 5 HP Each) 3 Inch Bullseye Lift Spindles Manik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 2 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. And Coming Soon 3 Inch Body Lift Kit 16.5 x 9.75 American Racing Baja Wheels Wrapped With 35x12.5x16.5 BFG All Terrains 00 toyota celica GT( Wifes Car ) Pics httpwww.angelfire.comla2ccla

FORD F150 spindle install

Hi i was woundering how much the spindles cost and if it would be tuff to install for a beginer. are the instructions detailed. what do i need for the install. what size tires can i fit with the spindles and how wide. i want to fit 33x12.50 tsl thornbirds. Thanks J.D. ------------------ [b]1999 F150 REG.CAB BLACK 2WD SPORT 4.2 LITER V6FLOWMASTER SERIES 40 DUAL EXHUAST K&N FILTERCHARGER MANIKS GRILLE GUARD PIONEER DEH-P4000 CD PLAYER WITH 4 3WAY SPEAKERS.[b]

Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Coil Spacers Cheap lift Please help...

Okay question for all of you suspension gurus out there. I have been thinking about this since I heard about ccla using the 1 coil spacer. What is to keep me from putting two of those on each side (above and below the coil) longer shocks and the adjustable castercamber. It seems to me like this would leave me with the stock coils (thus getting around the harsher ride that seems to come with longer

Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

NISSAN CUBE We got one Super Black SL wPreferred Package

We got a Super Black SL wPreferred Package on 5132009. For those of you who are trying decide between the major Box type cars dont count the cube out if you are reading the reviews by the professionals. The reviewers of late havent been favoring the Cube very well and honestly I dont understand it. We never considered the S trim so perhaps that is why but the SL Trim has plenty of gadgets for the techie.

too hard and actually turns down the bass. Otherwise the sound system is pretty good and I have no complaints. The radio integrates perfectly with the 2g iPhone too. My wife now wants to start downloading itune songs (thanks alot nissan). Before buying the cube she only had may a dozen songs on her iPhone. The auto temperature is a very cool feature too. Ive had it before on previous cars (1982 toyota

BMW SERIES 3 E46 Lotus fail

Loosing control on a down hill turn can happen to just about anyone. Here is another young driver in an expensive car loosing it.

Quote Originally Posted by pconwell It didnt look like he did anything too crazy. Lotuses are just so damn light I guess when he turned and came over that hill it threw the weight around and the back wheels lost traction. Yes he did do the worst thing on an MR improper line and not braking for the dip or at least lighten throttle. Drove an FR line by cheating center on an off camber up and down line. MRs are meant to drive a proper line which is the most traditional widest out no cheating the center line as late a turn in as possible so you can plant the rear weight on exit. If you notice his turn in was already on the center line by the time he entered the corner way too early. He should have been hugging the outside line broke or lightened throttle before the dip to load the fronts then turn in as late as possible towards the center line. If his car was widest right he wouldnt have spun or even if he did there would have been room to correct. Plus he was also on throttle entering the dip which is a no no you need to be at least off or only 14 throttle to flatten the suspension between the front and rear. On throttle the rear has the load making the front useless for steering. Having driven and owned MR2s for the past 15 years they are the most fun but tricky setups when driving at limit. Lotus EliseExiges are the same modern day MR setups. Hell even toyota makes the engines for Lotus 2ZZ-GE (1.8L VVT-i) celica GT-S engines used on the Lotuses.

FORD F150 35x12.50s and 3 Body lift

Anyone running 35x12.50s on a 4x4 with only a 3 inch body lift. I would think this setup would work but I was advised that the 12.50 width would rub at full lock. ------------------ 97 4X4 Flareside 4.6 5-Speed Superchip ASP underdrives Airaid Dynamax headers Borla Cat-back 5% Tint 2857516 16x8 Bahas Rancho 9000s. Soon to come 3 body lift 3157516 BFG KOs

Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Any 16.5x9.75 pics

I plan on getting a 4 suspension lift in the near future and I am looking at 16.5x9.75 wheels with some 35 mud tires. Does anyone have any pictures of this setup I was curious as to what the width looks like. If you can please post some pics or just e-mail me. Thanks. ------------------ 1997 Ford F-150 XLT 4x4 extended cab short bed Options Off Road package Towing package 4.6L V8 Captains chairs LS

TARGET_blank A A HREFhttpwww.zing.compicturepe0557f5ae565a8da25e9ce11b08009dfffd9add1.jpg TARGET_blank A A HREFhttpwww.zing.compicturep810cf5ac82eb57b84a62f699fb0f38e7ffd9ad72.jpg TARGET_blank A A HREFhttpwww.zing.compicturep3d23039451896f609154656f22698b8fffd991ca.jpg TARGET_blank A CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 just a thought 2WD is for girls jk

I know that with a locker 2WD trucks can get places an open diff 4X4 may have trouble with but with the lifts and stuff I see these 2WD guys getting.....why not just save up the extra money and get what you really want 4xFORD ------------------ 97 F150 SC 4x4 Lariat Black w all the factory toys 4.6 L K&N YUP 285s next week Cant wait to get this scanner working so I can show this beauty off S

TARGET_blank A A HREFhttpwww.zing.compicturepe0557f5ae565a8da25e9ce11b08009dfffd9add1.jpg TARGET_blank A A HREFhttpwww.zing.compicturep810cf5ac82eb57b84a62f699fb0f38e7ffd9ad72.jpg TARGET_blank A A HREFhttpwww.zing.compicturep3d23039451896f609154656f22698b8fffd991ca.jpg TARGET_blank A CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Raise just the front end of a 4x2

OK I have seen and read a lot about raising and lowering trucks but Im not sure what the consensus is about raising just the front of a 4x2 to make it sit level. Cranking torsion bars seems to defeat part of the purpose of the suspension but Ive never seen this done. What is the consensus for best way to raise the front to be level ------------------ 2000 F-150 XLT Sport Silver 4 door Supercab Short

Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Lift Finished Pics

Well Heres the Finished Product. A couple of notes though First off 35s WILL NOT fit on a 2wd with a 3 spindle lift and a 3 body lift. I had to use a 1 Coil Spacer on the front and added 2 blocks to the rear. I still had to trim the metal inside the front wheel well behind the tire. You CANNOT see the trimmed metal though. I now have a total of 7 Lift in front And 6 Lift in rear. And For anyone who

Updated The Signature ------------------ 98 F150 2WDBright Red Regular Cab 4.2 3.55 5 Speed Superchip 2 Superchip Decals (I Think They Add 5 HP Each) 3 Inch Bullseye Lift Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 2 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims 00 toyota celica GT( Wifes Car ) Pics httpwww.angelfire.comla2ccla

Well Mike The Coil spacers were 7.00 each. Thats right 7.00 The Blocks came with new U bolts and were 25.00 or so. I ended up having to buy different U bolt though cause they were too narrow to clear the Axle. I got all this stuff a local Autoparts store. Autozone Discount Auto Parts etc. Anymore s just let me know. ------------------ 98 F150 2WDBright Red Regular Cab 4.2 3.55 5 Speed Superchip 2 Superchip Decals (I Think They Add 5 HP Each) 3 Inch Bullseye Lift Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 2 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims 00 toyota celica GT( Wifes Car ) Pics httpwww.angelfire.comla2ccla

Theyre made by Pilot I think. Got em at Pepboys. For like 40.00. They shine a white light with a slight yellow color. Not that Amber color. I think they rate 55 watts ------------------ 98 F150 2WDBright Red Regular Cab 4.2 3.55 5 Speed Superchip 2 Superchip Decals (I Think They Add 5 HP Each) 3 Inch Bullseye Lift Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 2 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims 00 toyota celica GT( Wifes Car ) Pics httpwww.angelfire.comla2ccla

Heres the Run Down Doc-F150. Bullseye Spindle Lift 630.00 or so Body Lift 120.00 or so 3 inches or blocks in the rear 20-40 New U-Bolts 30.00 1 Coil Spacers 14.00 Rims and Tires 1244.00 Looking Down on a Lifted Z71........ PRICELESS ------------------ 98 F150 2WDBright Red Regular Cab 4.2 3.55 5 Speed Superchip 2 Superchip Decals (I Think They Add 5 HP Each) 3 Inch Bullseye Lift Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 2 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims 00 toyota celica GT( Wifes Car ) Pics httpwww.angelfire.comla2ccla

FORD F150 question for ccla

sorry to ask you again...you said the 3 inch spindel with body lift on a 98 4x2 wont fit 35 inch tires....but the 3.5 fabtech lift wbody lift will right Just making sure....the experts at off road wearhouse and 4 wheel parts in san diego keep telling me different information. Thanks again

Mounted In Front Air Dam 6 Kc DayLighters Back Up Lights Dual Batteries (Ones an Optima Yellow Topper) Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 3 Lift Pics

I was wondering if I could see everyones pics of their 3 to 4 inch lift because I am trying to get an idea of what my truck would look like... Thanks Chris ------------------ Ford F-150 XL BlackGrey 2-tone Custom Window Tint Standard CabLong Bed wBedliner Custom Graphics Package Auto 3.55 gears V6 (yeah I know its no V-8 but at least its a FORD right) Pioneer P-7000 Head Unit (2) 12 Pioneer Subs 800w Pioneer Amp Pioneer 6x8s

Mounted In Front Air Dam 6 Kc DayLighters Back Up Lights Dual Batteries (Ones an Optima Yellow Topper) Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 What would you do

Ok Im having a new frame put on my truck old one got bent in an accident (long story). Anyway theyre going to lift the truck off the frame to put the new one on. The body shop guy said he could easily install a body lift whatever I wanted but he doesnt do suspension lifts -- never done them. With money not being a factor what would you do go elsewhere after the new frame for the suspension lift do

Mounted In Front Air Dam 6 Kc DayLighters Back Up Lights Dual Batteries (Ones an Optima Yellow Topper) Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

NISSAN LEAF Helper leaf spring2 lift

Have a 97 F150 4X4 without ORP just put on 28575R16 BFG all terrain TAs no rubbing problems at all. Now I want to lift the rear a tad I was told by adding a helper leaf spring in the back it will give me about a 1 12-2in lift I would also like to add one for I will be towing a trailer and could use that help. I found exactly what I was looking for in JC whitney but they did not offer it for a 97. SO

Call 4 Wheelparts And tell them you want an Add a Leaf Will raise rear 2 Inches ------------------ 98 F150 2WDBright Red Regular Cab 4.2 3.55 5 Speed Superchip 2 Superchip Decals (I Think They Add 5 HP Each) 3 Inch Bullseye Lift Spindles Manik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 2 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. And Coming Soon 3 Inch Body Lift Kit 16.5 x 9.75 American Racing Baja Wheels Wrapped With 35x12.5x16.5 BFG All Terrains 00 toyota celica GT( Wifes Car ) Pics httpwww.angelfire.comla2ccla

FORD F150 Help me make a decision

Ok I am really confused and undecided as to what I should do with my F150. I have been pondering for months how to lift my 2wd. Ive narrowed it down to 3 spindles or 3 body lift with 285s. Which one should I go with. Spindles seem easier and less intrusive of an install but are way more expensive. A body lift doesnt look as good but is CHEAP Furthermore where is the cheapest place to get spindles 4wheelparts

Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Fabtechs Updaded Site

ccla- Are you still going to install the 3.5 fabtech Thanks for the update.

Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Post body lift questions

Hey Guys I need some help. I finished putting a 3 body lift on my f150 but I have a problem. I now have about an inch of play in my steering. In other words I have to turn the wheel about an inch before it turns the wheels. It is almost like the steering shaft spacer is loose but it wont go any tighter. As far as the installation I did most of it myself and it took about 14 hrs total. The worst part

Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 3in Body lift 3 inch Spindle 33 inch tires

Right now i have a 99 f15 sc with a 3 in body lift and 33 inch tires. Has anyone added a 3in spindle lift to this without adding bigger tires. From what i hear you have to add a 1 inch coil spacer to fit 35s. I just bought new 33s so i dontcant just go and and buy new 35s when i got a brand new 33s installed. Anyone got pics of this ------------------ 1999 4.2l 2wd super cab F-150. Mods 3in body lift and 28575 R16 BFG AT 3.55 gear 10 disk changer

Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 3 BODY LIFT

I KNOW THAT MANY OF YOU HAVE INSTALLED 3 INCH BODY LIFTS ON YOUR 4X4 TRUCKS. I WOULD REALLY LIKE TO BE ABLE TO SEE SOME PHOTOS AND HERE SOME DETAILS ABOUT THE JOB LIKE THE BEST BRANDS WHAT IS NOT INCLUDED AND WHAT TO WATCH OUT FOR. I HAVE A 98 EXT. CAB. THANX IN ADVANCE FOR THE INFO AND PICTURES.

Mounted In Front Air Dam 6 Kc DayLighters Back Up Lights Dual Batteries (Ones an Optima Yellow Topper) Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Leveling Coils Spindles

Im looking for some opinions on my suspension setup. I have been looking through all the archives and I know whats available Im having trouble deciding which is the best way to go. Im currently running factory wheels and tires on my 2wd with the Fabtech leveling coils (not the a-arms just the coils). I want to run 2857516s (33s) on the factory wheels but I want a little more lift. I dont do any serious

Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Question about body lifts.

I am not sure how the setup is with the pedals in the newer sensorized trucks. Im used to linkage and cables. What kind of setup do our trucks have and does it change anything regarding the pedal positions when you put a body lift on. Reason I ask is I know the shifter is 3 lower in the cab. Just wondering if the pedals are affected. ------------------ 97 4X4 Flareside 4.6 5-Speed Superchip ASP underdrives

Mounted In Front Air Dam 6 Kc DayLighters Back Up Lights Dual Batteries (Ones an Optima Yellow Topper) Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Mixing Bullseye spindle 3.5 Fabtech DAMAGE ()

Ok...heres the story. I wanted Off Road Warehouse in San Diego too install a Fabtech 3.5 kit and Bullseye spindles on my Y2K F150 2wd. They absolutly REFUSE to do it They said Bullseye wont honor the warranty on their spindles if they are added to the Fabtech...so either will ORW. The reason is too much leverage on the lower ball joints of the spindles with the added lift. I asked about the updated

Dibs On the coils and A-arms Patrico. Let me know when you wanna get rid of them buddy. ------------------ 98 F150 2WDBright Red Regular Cab 4.2 3.55 5 Speed Superchip 2 Superchip Decals (I Think They Add 5 HP Each) 3 Inch Bullseye Lift Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 2 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims 00 toyota celica GT( Wifes Car ) Pics httpwww.angelfire.comla2ccla

FORD F150 3 inch Body lift with 1 12 inch coil spacers

Hi I just bought the 1 12 inch coil spacers yesterday and will install them next week. If I was to get a 3 inch Body lift(giving me about 4 12 inches or so) could i fit 33x12.50x16.5 with minimal rubbing and maybe slight fender trimming. I know i can fit 28575R16 with that amount of lift but i think they look to skinny. PS anybody with pictures of a reg. cab with a body lift please post them. -----------------------------------------------------

Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood AmpsPolk Audio DX7 5X7s In The Front Doors 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 Bell Tech 4x4 Lowering Kit

Has anyone out there installed a Bell Tech (pn 3932) lowering kit on their 4x4 yet Just curious about the install and any concerns you may have. ------------------ 2000 F-150 XLT Styleside -4x4 (yes 4x4 and Im gonna lower it) -Reg.Cab -Short box -White -Sport (I pick it up tomorrow)

Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims CLICK THE PIC FOR A BIGGER ONE ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

FORD F150 3 spindle lift installation

Going to do this installation this Saturday. Is there any tricks of the trade that I should know or that someone has experience Trying to find out how hard this installation will be or if Ill need special tools to make it easier Thoughts or comments Doug

Spindles 3 Body Lift 1 Coil Spacers 3 Blocks In rearManik Grill GuardNerf Bars Vent VisorsAir Box Mod Fog Lights Mounted In Front Air Dam 4 Kc DayLighters Back Up Lights Alpine CD Player 2 Kenwood Amps 10 Inch MTX Blue Thunder SubWoofer Tinted Windows. 35 BFGOODRICH ALL TERRAIN KOS Mounted on 16.5x9.75 American Racing Baja Rims ........... IF YOU CANT STOP SMILE AS YOU GO UNDER ........... 00 toyota

Example offers of car parts toyota celica rear suspension

  • 2x Toyota Celica TA60/RA40/RA6 Hatchback ACP Rear Drop Links Suspension - United Kingdom (10.11 GBP)
  • 2x Toyota Celica ST16 Saloon ACP Rear Drop Links Stabiliser Suspension - United Kingdom (10.11 GBP)
  • 2x Toyota Celica TA60/RA40/RA6 1.6 ACP Rear Drop Links Stabiliser Suspension - United Kingdom (10.11 GBP)
  • 2x Toyota Celica TA60/RA40/RA6 2.0 ACP Rear Drop Links Stabiliser Suspension - United Kingdom (10.11 GBP)
  • 2x Toyota Celica ST16 2.0 ACP Rear Drop Links Stabiliser Anti-Roll Suspension - United Kingdom (10.11 GBP)
  • Toyota Celica Shock Driver Rear 1.8 O/S Right Rear Suspension Leg 2002 - London,United Kingdom (23.74 GBP)
  • Toyota celica rear suspension springs 2005 - Gainsborough,United Kingdom (10.00 GBP)

Ask an expert