nissan note rear suspension arm

Answers and questions: nissan note rear suspension arm

NISSAN broken lower control arm

Check this out My friend has a 2008 Fontier LB crewcab with a Fabtech lift kit. He does moderate off road trails. No rock crawling. He just sent me this e-mail last night. I will keep you guys posted with more info. httpsites.google.comsitedesertr...flasvegashome www.code3offroad.com My wheel fell off luckily I was in the drive way. I took it in to the dealership and all they had to say was Dont you

Anyone has the recall info I will advise him to contact Fabtech. 4wheelpart soldinstalled it. Maybe they can help. Found it MAY 20 2010 Recall ID 29245 Hide Details Recall ReasonsuspensionFRONTCONTROL armLOWER arm Recall DateMAY 20 2010 Model AffectedFRONTIER Potential Units Affected1873 Recall Summary nissan IS RECALLING CERTAIN FRONT AND rear LOWER LINKS PNOS. 54501ZQ00A 54500ZQ00A 551A1ZQ00A 551A0ZQ00A

NISSAN JUKE Cusco Suspension Parts

I just spoke with Cusco this weekend and am trying to get them to bring some parts over from Japan. They are currently not bringing anything over since they do not want to have too much unsold inventory. For those of you that dont know the name they are one of the most respected companies in the business but the only thing is that their parts tend to be a bit more expensive than others but you definitely

Just heard back from Cusco and here are the MSRP prices. 271 311 B16 rear sway bar 334 MSRP 271 477 A Front lower arm bar - Ver.2 200 MSRP 271 540 A Front strut bar - OS type 200 MSRP Please note that the only part that fits on the AWD is the front strut bar. The rest of the stuff is for FWD only. Given the price of the Stillen strut brace I think Cusco is a bargain. If you guys really want I can see

View Rear suspension arm for NISSAN NOTE

NISSAN 2nd Gen (2005) FAQ

2nd Gen (2005) FAQ Part 1 [Updated 05-03-12] This FAQ will hopefully have answers to some of the more commonly asked questions. Please add your input and correct me if anything I have written is incorrect. I will edit the original post with any new information. 2005 nissan Frontiers are referred to as 2nd Generation Frontiers WEBSITES that have nissan and 2nd Gen related products Site Sponsors 4X4

NISSAN MAXIMA II 84 to 88 Maxima Wagon Spotted

I went for a little drive today to see where this garage Im gonna take my Maxima to get aligned was at. I got there and what do I see sitting in the weeds but a Maxima Wagon Body looked in decent condition but they had already closed. Tomorrow Im gonna head over and take some pics and if it runs and the price is right I just might buy her. Anyone else on here own any 2nd gens Did they make wagons in 1st gens This one looked like a 2nd but Im not too sure...

Little find while looking Quote » With the 240Z which it introduced in 1970 Datsun (a.k.a. nissan) proved that it could build a vehicle so good that it would sell on inherent virtue rather than price advantage. But the sports car market is a fairly narrow one hard-core enthusiasts can make a car a success while seeking characteristics most buyers would never even consider. Midsize sedans on the

NISSAN JPNUS parts interchangeability thread

I apologize if there is already a thread floating around here somewhere for this so mods please feel free to movedeletemerge into the overall sticky thread as you see fit. I think that with the coming eligibility of the earliest R32 Skylines for importation under 25 year exemption and subsequent years to follow (R33 R34) that it would be beneficial to have a sort of FAST database here on NICO for parts

httpwww.gtrusablog.com201001nissan-skyline-gt-r-oem-part-numbers.html Complied by John from LM24.net Part numbers for RB26DETT only unless otherwise noted. Ignitor pack- R3233- 22020-05U00 Spark Plugs- PFR6A-11 Clutch Pull to push conversion- Late Model R32 R33 Front cover assembly 32110-05U11 (japan part only) Gasket 32112-05U12 Clutch fork 30531-01S00 (same part for a 1991-1993 240SX) Spring 30514-14600

NISSAN need advice on tires please

my wife just ordered these rims for me for X-MAS...they are 16x8 with 0 offset.My truck is a 2x4 and Im gonna do the t-bar liftjust wondering if I go with a 2757016 instead of stock 265s 70s will they end up being the same height with the rim being 8.I dont know crap about tire sizes but I would like to buy some bfg ats or something with similiar look.If anyone knows a good place I could order from

when youre stuffed and turning the tire actually comes back farther in the fender well than stock. Even a 31 tire can rub if used on a rim with less backspacing and more trimming is required. A 32 tire on an aftermarket rim with or without lift will require trimming of not only plastic but also of the fender itself and the body seam underneath. An angle grinder works well for this work. With any nissan

JEEP GRAND CHEROKEE I ZJ ZJ suspension lift kit help

Hello everybody I was currently going to start saving up and looking for a 6 lift kit for my 1995 Grand Cherokee Lerado. I am pretty new to all this and was wondering if anyone could give me tips about how much it will cost everything I will need going from stock suspension to the 6 suspension lift if I should do a couple inches of body lift so on and so forth. So if any one could help me out out there that would be great Thanks

concerns. -Ron- I copied and pasted that from here httpwww.jeepforum.comforumf13z...u-post-880249 welcome to the forum youre in the right place youll learn a lot. after doing some research and looking through the picture threads you can probably get away with what youre looking to do with one of the 3.5 kits. 6 seems like the most popular height for a lot of other rigs chevy toyota ford dodge nissan

NISSAN MAXIMA 2012 Nissan Maxima FULL Details - First posted here on NICO

2012 nissan Maxima FULL VEHICLE DETAILS FOR THE 2012 MODEL YEAR - UNPUBLISHED May 13th 2011 Thanks to a few connections within nissan North America (NNA) I have been provided with complete details about the upcoming 2012 nissan Maxima . The following are details which until now have not yet been published by nissan or any other automotive enthusiast blog or forum. Fortunately you are a member of

NISSAN BNR32 Glass

Does anyone have a source for glass for a 90 BNR32. Im looking for all new glass. Doesnt need to be OEM. I live in Phoenix AZ. Also anyone try Yonaka

Complied by John from LM24.net Part numbers for RB26DETT only unless otherwise noted. Ignitor pack- R3233- 22020-05U00 Spark Plugs- PFR6A-11 Clutch Pull to push conversion- Late Model R32 R33 Front cover assembly 32110-05U11 (japan part only) Gasket 32112-05U12 Clutch fork 30531-01S00 (same part for a 1991-1993 240SX) Spring 30514-14600 Spring 30534-E9000 TO bearing 30502-14601 Bearing sleeve30501-S0160

NISSAN Rogue Altima

Still like my Rogue over any other small X over. Was at Toyota dealer checking out a new Rav 4 for 24500 includes freight you can get a nicely equipped Rav 4. Id like to know if there is any Rogue and Altima owners here and I have posted the question on the Altima forums but no answers. I have found an 06 Altima 2.5 S special off lease from nissan credit Canada with 44000 kms loaded but no leather

some had to be recalled. I had a 5spd manual trans the ridiculously tall shifter and weird clutch engagement made it a chore to drive smoothly. Not the best manual I have driven. The automatics are reportedly trouble free. Chassis The rest of the chassis appears fine. Some have had minor issues with the HVAC controls the front undertrayengine cover can come loose rattle or make whistling noises. nissan

NISSAN Aussie 3 Lift PRGRadflo Install

Well after 6 weeks of all sorts of issues in getting a lift kit.........finally my Radflo suspension arrived in Australia last Monday or Tuesday from PRG with the great help from Jen and Greg.........................and after much crap in dealing with the customs broker Schenker the suspension was released on Friday giving me enough time to install it on the weekend. (This company would not release

NISSAN What are the little things that bug you about the Versa

Was looking at buying one of these things for tooting around town and short trips. Manual shift base-mid option package. Nothing too fancy Im the type of person that gets very irritated by little things and they often make all the difference for me in a purchaseno purchase decision. As owners of Versas what could you tell me are the little things that irritate you about your Versa Also add things that make the car great. -CF

After looking through all the things that us Versa owners have discovered about our cars...its interesting to note that nissan dosnt seem to be listening but Hyundai IS If you check off all the problem items you will find them all corrected on this new VersaLike 2009 Touring Tilt-telescopic steering standard 4 wheel disk ABS brakes electronic stability control (ESC) fold flat rear seat Daytime running

NISSAN general consensus...

what do yall prefer to lift our trucks... the 2.5 coil over fronts or billet spacers and for the rear ( since air shocks do not seem to be available...) add a leaf or blocks mines a 4x2 05 se btw

It is not expensive at all. All your doing is adding a few leafs to raise the rear about 2 or so not too sure. This is used by mild off roaders that need easy lift with some traction control that want to avoid significant body roll created by the blocks. Downside is that the leafs will flatten overtime and the rear end will sag. Otherwise another great option for some good ol off roading. noteS

NISSAN DIY Front Disc Brake Cleaning Pad Replacement Bleeding

This how-to is a step-by-step procedure for cleaning and servicing disc brakes on the Rogue. Actually this could be applied to nearly any vehicle with disc brakes. It takes approximately one hour to do all 4 brakes. Newbies should expect to take at least 2-3 hours the first time around. Legal Stuff The braking system is a critical part of your vehicle. The information provided below is for information

able to jack up the rear of the vehicle high enough under the rear crossmember in order to put jack stands under the frame rails. I had to jack up the suspension arms and then place the jacks under the arms--a lot less secure than them being placed under the frame rails IMO. Especially considering you may be wailing on those rear brakes since theyre more likely to have seized components. Another note

NISSAN Stearing Issues - swaying from side to side.

Heres my problem My truck is swaying from side to side and almost scarey when driveing in ruts on pavement. I have installed a new (upgradedheavy duty) center link had a wheel alingment all balljoints tie rods idler arm bushings are in good condition (no play according to the garage) When driving my truck my stearing needs to be constatly adjusted with the wheel when I am trying to go straight. I do

the GREEN or factory setting. I would crank in as much positive caster as the suspension will allow. And recheck the suspension carefully alot of play cannot be easily FELT by hand and nust be pried to check. Remember you have a 4-5000 truck at speed acting on the suspension and will find play that you cannot always feel Is there a way I can attempt to adjust the positive caster myself - keeping note

NISSAN Your Take on Mods...

Hey everybody Just wanting to get your opinion on this be as rude or as cool as your heart allows - Where would you start your mods first if you could go back and do it all again - engineexhaust wheelstires liftshandling or some other sequence I realize that sometimes you cant start one without the other but i think this would make a great thread and put out a bunch of great info. Thanks fro reading Bravo D

bumper with a winch really only makes sense once the front suspension is upgraded to handle the extra weight. Quote Originally Posted by yesterdaysradios I guess it depends on your definition of mods. Which could range anywhere from mild to wild. To me a mod is any changes made to the vehicle that werent on it when it was sold new. For me the changes to my Frontier have been on the mild side and noted

NISSAN Need help & advice - looking at buying a frontier

Hello I am looking at buying a 07 frontier or a 07 Tacoma. I want the 4x4 4 door version for use in Iowa. I will use it mainly for carrying my bicycle around and towing around a motorcycle and trailer as well as for home purchases. I like the long bed version but also the Nismo which only comes short bed (99% sure of this) I have a few questions 1) Is the NISMO version worth the money Bilsteins etc

to match your seating surface (cloth or leather) and im sure there are some other things im missing) edit o yeah -fog lights standard -auto onoff headlights -utilitrack and factory spray-in bedliner standard bed rail caps. -remote keyless entry -leather-wrapped steering wheel -first aid kit. the 5-speed auto is also standard - no chance for a 6-speed manual. that should be about it. on that note

NISSAN Torsion bars and blocks lift

i have 3 inch blocks i am wanting to put on my 98 how hard are they to install(is there a diy thread) and how hard is it to do the torsion bars

then crank them up (more lift )as for the blocks I would never use them I would go with an Add a leaf instead. ETA DO This at your own risk Using a 19mm wrench remove the locknut from the top of the torsion bar adjuster bolt. Using a 19mm socket on the bolt head and a 19mm wrench to hold the top nut remove the torsion bolt from the cross-member. When the bolt is free of the cross-member take note

BMW SERIES 5 F10 F11 Motor Trend F30 Absolutely Annihilates Every Potential Competitor

I point this out just because the F10 is a scaled up version of the F30. I cant ever recall reading such unabashed praise for a car. Sporty Luxury Sedan Comparison The More Things Change Eight Contenders Vie For Sport Sedan Supremacy From the May 2012 issue of Motor Trend By Motor Trend Staff Photos Julia LaPalme Illustrator Paul Laguette In the car world a new BMW 3 Series is a big deal. BMW created

TESLA ROADSTER My initial thoughtsfeedback on my 4060kwh Model S

Disclaimer other Tesla owners please dont get too defensive there are tons of good things about the car and its a great first-attempt at a new concept but this is my feedback focusing mainly on the negatives and what I would change its been almost a week500 miles with the Tesla here are my initial thoughts [hide] [top] A) Its a good car decently well made with some cool features but its not a revolutionary

TOYOTA TACOMA TRD Off Road vs TRD Sport

I am considering a 2011 Toyota Tacoma Just wondering if the Sport would be better on gas milage than the off road Or would the Off road be better than the sport Trading in My 2005 nissan Titan SE woff road package. a few things the Tacoma does not have that the new Titan has Power drivers seat Rockford fosgate stereo rear power window and locking tailgate. But the Tacoma has rear view cam Titan only

I picked the off-road because I use it off-road and function over anesthetics for me off the lot. Im going to mod the piss out of it anyway (color match and satoshi grill frontrear armor will replace bumpers ect). All up to you. JBL not worth the money but not bad for stock. I prefer it to the pile of crap BOSE I had in the Infiniti G35... its probably pretty comparable to the Fosgate in the nissan.

I picked the off-road because I use it off-road and function over anesthetics for me off the lot. Im going to mod the piss out of it anyway (color match and satoshi grill frontrear armor will replace bumpers ect). All up to you. JBL not worth the money but not bad for stock. I prefer it to the pile of crap BOSE I had in the Infiniti G35... its probably pretty comparable to the Fosgate in the nissan.

LEXUS IS II Frontier A redesign is scheduled for the 2009 or 2010 model year.

Officials are mum about it but insiders say the Cube is definately coming in early 2009 as a 2010 model. By LINDSAY CHAPPELL AUTOMOTIVE NEWS nissan has played catch-up on new-product releases in 2006 and 2007 after a lull that slowed the brands sales pace. In the past 12 months nissan has introduced the Versa redesigned the Altima and Sentra and re-engineered the Titan pickup. The next two years will

BMW SERIES 5 E39 Koni Sport & ShockStrut mount install...

Finally got around to installing some new shocks in the car. Since I needed to get an alignment this week I went ahead and replaced the tie rods as well. I had a knocking noise in my suspension discussed in an earlier thread and was suspicious of the tie rods. After removing the the rods and struts I can definitely say it was the shocks. The tie rods were in great shape at 67K miles but the strutsshocks

Quote Originally Posted by domiguy Michel is there some guide you followed to do the installation What tools did you need to do the install I need to replace my suspension and I already have it I just need to get it installed. I have some tools at home from when I used to work on my nissan 200SX - including the special tool that is used to compress the springs I have done so many suspension installs

FORD F150 How long do these engines last

Hello Im new to the board and am just looking for some info. I currently have a 95 tahoe but its going to be sold or traded soon because Im tired of repairing it every 500 miles. Ive been looking at a 97 xcab stepside with a 4.6. I really need a truck soon but this one already has 70000 miles on it. Do these engines go for 150000 miles Engine sounds great and all I could spot was a little oilgrease

Complaints Database www.nhtsa.dot.gov Search for records on Year 1999 Make TOYOTA TRUCK Model TACOMA Consumer Complaints 77 Record(s) found Summary DRIVERS SIDE WINDOW RATTLES AND IS NOT ABLE TO BE PROPERLY FIXED. MJS ENGINE REPLACED. MJS FRONT END suspension SHAKES UNABLE TO BE RECTIFIED. MJS rear DIFFERENTIAL FAILED. MJS STEREO FAILED AND REPLACED. MJS Search for records on Year 2001 Make nissan

FORD F150 I found it - the original Piston Slap topic. Enjoy

bbraynor posted 07-21-98 0701 PM ET (US) HELP The 5.4L may have a design flaw If you have experienced a cold start knock or more simply a knocking sound when starting a cold 5.4 please let me know Others have had this problem which sounds unfixable. Any info would be of great help. The 99 5.4 Ive been informed should have been fixed. I bleed FMC Blue but my experience with problems makes me shudder

MARUTI VERSA How to Remove Tires (one at a time) with Floor Jack

Vehicle Info 2009 nissan Versa SL Sedan 1.8 Floor Jack MVP Pro-Lift I am quite a beginner when it comes to working on cars and I am afraid to use a floor jack and stand(s) by myself. Ive seen it done a lot when people have changed brakes for me but I still have that fear of my car falling or not placing a jack stand in the right place. I want to remove my rear tires (one at a time) to paint my brake

not sure if there is enough room on the V but some cars there is room for the jack saddle and the jack stands. If not there is should be jacking points in the front and rear of the car though I never had any luck using those. I usually just end up putting the jack where the lower control arm bolts to the car or on a frame rail. Then place the jack stands where the notch is. Jacking points should be noted in your owners manual.

sure if there is enough room on the V but some cars there is room for the jack saddle and the jack stands. If not there is should be jacking points in the front and rear of the car though I never had any luck using those. I usually just end up putting the jack where the lower control arm bolts to the car or on a frame rail. Then place the jack stands where the notch is. Jacking points should be noted

sure if there is enough room on the V but some cars there is room for the jack saddle and the jack stands. If not there is should be jacking points in the front and rear of the car though I never had any luck using those. I usually just end up putting the jack where the lower control arm bolts to the car or on a frame rail. Then place the jack stands where the notch is. Jacking points should be noted

Ask an expert