fiat ducato wheels

Cars related to phrase fiat ducato wheels

fiat ducato wheels II
fiat ducato wheels II

Answers and questions: fiat ducato wheels

FIAT DUCATO DUCATO 16 Inch wheels

ducato 16 Inch wheels Hi. I am looking for some wheels that would fit a 2009 ducato Van. I know so far that they are 6 inch by 16 inch rims with six studs. Tyres are 225 74 R16. However I am not sure of the offset for the wheels. New fiat part for wheels is 1346940080 but I cannot find further specs to make sure the new wheels i find will fit. I think that all 6 stud patters are the same and that the

FIAT DUCATO Ducato Maxi 180 xlwb wheels

Hi all I have just sold my 57 plate ducato 160 and have purchased a new ducato 180 xlwb. My old van had the 15 fiat Alloy wheels and I want to put new 16 Alloys on the new van. Can anybody tell me the what the offset is and stud diameter for the Maxi xlwb. I have also been informed that all new fiat ducatos now come with a spare wheel

Hi rolopolo I am sticking to 16 as I want to use original tyres. There are loads on ebay that say they are suitable for the latest ducato but they have an offset of 50 and I have been informed that it should be ET62 There are the latest scorpion wheels on ebay that says they will fit but they have an offset of 50.

This offset tool Ive based it on ET50 & ET62 so it shows 12mm But ET68 equal 18mm Tyres based on what I have fitted __________________ fiat Forum Useful Links Donate to FF    Buy FF Merchandise    Classifieds    FF Insurance    How-to Guides    FAQs   Quote   16-01-2014   8 rayc Get Your Own Title Join Date Mar 2009 Location Wimborne Posts 119 Thanks

The wheels that I am after are 16 fiat Alloys. I am waiting to find out from the seller what PCD 118 or 130. Attached Thumbnails   __________________ fiat Forum Useful Links Donate to FF    Buy FF Merchandise    Classifieds    FF Insurance    How-to Guides    FAQs   Quote   16-01-2014   10 Pasty007 Get Your Own Title Join Date Jul 2010 Location

Originally Posted by Pasty007 The wheels that I am after are 16 fiat Alloys. I am waiting to find out from the seller what PCD 118 or 130. Did you get them in the end

View Other for FIAT DUCATO

FIAT DUCATO III 250 wheels for fiat ducato 2.3 120 multijet year 2011

Which alloy wheels in 15 inches are suitable for fiat ducato 2.3120multijetyear 2011 Are there any specific producerwhich is PCD ET I have tyres 2157015 Thanks in advance Shomikus

I got some from these guys very good service. httpwww.rimstyle.comalloywheels..._model_id3290 From memory if you have 15 wheels they will be 118 PCD. Its the maxi 16 that are 130 PCD Stu

I found ALESSIO TOP 6.5X15 5X118 et 50 is this ET suitable for ducato or i need to find with bigger ET like 55 or 60

FIAT DUCATO Wheels and tyres

Put a pair of Winter tyres on the front of my van this morning. Anyone thinking of doing this bloody get on with it. Driving it in the snow is amazing. I lost a fair few days work over the last 14 months due to the van being undrivable in snow. I can (just) afford to loose the work but I cant afford to leave the van parked upstranded down some iffy side street. No worries now. Im now confident to drive

I dont know about the 15 wheels. BUT for god sake dont buy 16 wheels form a 2010 Relay to fit a 2007 ducato Maxi without seeing them. I learned this the hard way. Bought wheels from ebay after speaking to the lad and being told that they would fit a fiat . Presumed that all the front hubs for 16 wheels would be the same Got them home never unwrapped them and gave them to the tyre fitters to fit snow

Originally Posted by Joiner I dont know about the 15 wheels. BUT for god sake dont buy 16 wheels form a 2010 Relay to fit a 2007 ducato Maxi without seeing them. I learned this the hard way. Bought wheels from ebay after speaking to the lad and being told that they would fit a fiat . Presumed that all the front hubs for 16 wheels would be the same Got them home never unwrapped them and gave them to

HTML Code (I am not surprised to hear you had to pay a lot for a secondhand X250 wheel. They are in demand as they are no longer supplied as standard equipment What no wheels Is this a cost cutting idea from fiat . What is the alternative something square

Admittedly not on a ducato but I only use two winter tyres and never had any problems like that. Mind you I dont drive it like its a summers day if Im on twelve inches of snow over a sheet of ice.

FIAT DUCATO Locking Wheel Bolts for Ducato Alloy Wheels

Does anybody know where I can buy a set of locking wheel bolts for my 2007 Reg ducato Motorhome It has Alloy wheels and probably requires something different from the normal fiat car wheel bolts.

FIAT DUCATO Ducato wheels

RE ducato wheels I have found that the new (2009) ducato Maxi wheels are 16 5 stud with PCD of 130 and offset (ET) of 56mm. This should mean that Mercedes Sprinter wheels (ET 45) and VW Crafter wheels should fit as they also both have OCD of 130 and 5 stud pattern and similar offsets. Center hole diameters (the Bore) are also important. I think that the ducato is 78mm and the Sprinter is 84mm so spinter wheels should fit OK

Gday firestone99 I am no help with your specific questions but just saying hello. I have a 2006 Avan Applause 500 - see www.manins.netmotorhomesitemap.html for lots of info on it. As you would know it is based on the ducato 2.8JTD Maxi - one of the last of the 244 models. Good to make contact.

Hello Peter Yes we have a fiat Avan 500 Motor home 2009 we have just bought it at auction (from a failed RV outfit) and are going through the ropes of ownership. I have had a look at your site and you have done quite some amazing things with your van Ours looks very similar but no heater Also most recently the 500 now comes with a 3 litre engine. Our biggest shock was to try to get a spare key from

Wow I am sure you did well getting it at auction. A diesel air heater is really the best thing you can add to an Applause - it has pretty much everything else as standard. That and solar panels to keep the house battery in good condition and for bush camping. Yes but its not just fiat that has outrageous prices for spare keys. Try Peugeot for example. And no spare wheel Seems very strange Have you

FIAT DUCATO NEW alloy wheels 16 tyre dimension

I have fiat ducato VAN X250 2.3MTJ YEAR 2011 with steel wheels and tyres 2157515 now i bought new alloy wheels 6.5x16 5x118 but i dont know which tyre dimension to mount Thanks in advance Shomikus

FIAT DUCATO x250 fog lampswheels

Just 2 questions Got foglamps for 08 ducato on internet but came with no brackets. fiat dont seem to know how theyre held on.(not sold many vans with foglamps in ireland)Does anyone out there have a van with foglamps and mabey they could post pic of bracket or maybe have part number. Second does anyone know if 16 or 17 inch steel wheels are available for this van. Thanks.

The part No. for genuine Fog Lamps as fitted to the X250 is 51782979 & it appears from the parts diagram they are held in place with a single boltscrew part number 15690807 as there is no bracket of any sort shown in the parts diagram. The same system seems to have been used on the 244 different fog light numbers but the retaining bolt is the same No. - 15690807 There are two different 16 steel wheels

FIAT DUCATO ducato wheels same spec on new vans

A silly question I know but are the 16 inch wheels on the new shape ducatos (2007) the same as those that were on the older shape 2002 to 2006 van. Ive just bought a ducato with no spare and the local Scrapper has loads of wheels off older ducatos for sale. cheers tim

Hi I dont believe they are. the best thing is to check the data stamped on your wheels it is on the outer face where the wheel trim clips into place and will be something like 16 6Jx16H2. Also on the face will be stamped the offset e.g. ET 68 or similar. Your replacement wheels should be the same. Ray

FIAT DUCATO ducato 2.8 motorhome wheels

My neighbour is in need of a little wheel advise. The front wheels are bigger than the back. front 21575R 16C back 19570R 15C He would like to know Is this normal What is the reason for this Also there is only 1 spare for the back wheel. Should there be a spare for the front He has asked local dealers and they have not been very helpful so hopefully there is somebody here who can help. Thanks Darren

Hi Ive never come across any commercial van not having the same size wheels all round apart from anything else as you mentioned there is the issue of spares. The 2.8 maxi chassis (ducato 18) should have 16 wheels not sure about the 14 standard chassis possibly this has 15 wheels. It may be that a previous owner changed the fronts to try to improve fuel consumption.

Ive seen plenty of motorhomes with smaller wheels at the back than the front. I cannot recollect whether any of them were ducato bases but I am sure that none of them were straight van conversions.

Hi Davlins Yes they will fit fine. You could go for the 16 wheel. Simon

thanks for the reply.

Originally Posted by moodrater 16 has different pcd wont fit. yes- I found the answer to my question and it all revolves around the PCD. Apparently there are only 2 options ie 118mm or 130mm. Interestingly enough fiat UK told me the way you can identify is by the colour of the wheel - ie is it grey or green However the first thing some companies do (eg Autotrail) is take off the original wheels and change them over to alloys

FIAT DUCATO Ducato Wheels

Can anyone tell me if all ducato 15 wheels are the same I wont to know if a 2004 15 will fit an early 2007. Part number would help if anyones got it. Thanks Des

Part No. for 15 steel wheels from a 02-06 ducato -1337412080 & also 1300254080 not including the 4wd version Part No. for 15 steel wheels from a 07 X250 - 1348979080 substitited on 0706 from 1346868080 Whether this means they are not interchangable You might want look on the online ePER Spare Parts at the top of the page for the 244 models but that version of eper doesnt cover the X250 models. Cheers

Originally Posted by FreeSpirit Part No. for 15 steel wheels from a 02-06 ducato -1337412080 & also 1300254080 not including the 4wd version Part No. for 15 steel wheels from a 07 X250 - 1348979080 substitited on 0706 from 1346868080 Whether this means they are not interchangable You might want look on the online ePER Spare Parts at the top of the page for the 244 models but that version of eper doesnt cover the X250 models. Cheers Many thanks very helpful Des

My 08 ducato came with no spare so picked one up from vanbreaker off old shape 05.Wheel fitted fine .Different size tyres but this is ok for spare.

Originally Posted by desbarron Many thanks very helpful Des The alloy wheel manufacturers seem to recommend the same wheels for the 96-06 and 07 on models so I imagine they are a straight swap. Any relation to the barrons in tower cork

FIAT DUCATO Ducato Wheels

I hope some one can answer my question. Do the wheels from the previous generation of ducatos fit the X250. I am looking for two 16 rims for my Maxi. I see plenty for sale for the older vehicle but am afraid to buy in case they are different. I would buy wheels from who ever may have them at the right price and who can arrange a courier. Many thanks.

The 15 wheels fit ok

15 wheels are 5x118 and 16 are 5x130 for both models as far as i know so the old ones should fit You can get new steelies on ebay.de but if it was me Id look for a set locally with excellent tyres as youll actually save money in the long run that way.

I am going through the same exersize as I need a 15 steel spare for a new 2011 Autotrail Excel motorhome on a fiat base. I already have a suitable tyre but I have been informed that the wheels actually changed in 2006 (presumably either the amount of recess or the distance between the holes) The tyre sizes do not appear to have altered. I suppose I need a bit of convincing that an older pre-2006 wheel will actually fit as it would be an expensive mistake if it didnt

The alloy wheels from my previous motorhome (2004 ducato Maxi 16) fit onto my 2007 x250 Maxi van apart from the tiny plastic centre caps on the front which wouldnt fit as the end of the drive shaft was a little too long. I got round this by grinding about 4mm of the excess thread off the end and all was ok. If you get the right stud pcd you will be ok. As far as I know they are 5 x 118 x 15 5 x 118 x 16 and 5 x 130 x 16 Stu

FIAT DUCATO Ducato X244 Alloy wheels - which Bolts

Hi all I have just joined your forum after following a link from a motorhome forum. Just bought a set of genuine 16 alloys for my van and fitted them. the bolts from the steel wheels dont appear to be suitable. Does anyone know if there are special bolts for the alloys and if so the part number Local fiat dealer is about as much use as a chocolate fireguard. I had a Punto with alloys fitted by the dealer but the original bolts were used. Thanks David

Hi The part number for the wheel studs to suit 16 fiat alloy wheels for a 244 model - 1340130080 . Part No. for studs to suit 15 alloy wheels - 1340126080 Hope this helps Cheers

FIAT DUCATO II Front wheels toe-in Ducato 1999

The user manual says the toe-in should be -2mm. Does that mean that the wheels should diverge (toe-out) My vehicle is ducato Combinatio 1999 (version 14 - 3250kg SWB low roof nine seats) Thanks

FIAT DUCATO Seat & Wheels

Hi guys. I have a 58 plate ducato Recovery truck and Im looking for a Single Passenger Seat in Dark GreyBurnt Orange. Anyone know of one for sale Also Im looking for a set (4 or 5) of 16 motorhome Alloy wheels with or without tyres. Again anyone know of any Ive looked on eBay but the sellers want astronomical prices for said items Regards CHT.

FIAT DUCATO alloy wheels

does anyone know the ducato 2005 2.0jtd swb wheel fitment guide for buying alloys or any matching wheel sizes from other vans than can be swapped onto my ducato

Example offers of car parts fiat ducato wheels

  • GENUINE FIAT DUCATO FRONT BRAKE DISC. 300MM. 1.8 TONNE. ALLOY WHEELS. - St. Leonards-on-Sea,United Kingdom (9.99 GBP)
  • GENUINE FIAT DUCATO FRONT BRAKE DISC. 300MM. 1.8 TONNE. ALLOY WHEELS. - St. Leonards-on-Sea,United Kingdom (9.99 GBP)
  • GENUINE FIAT DUCATO FRONT BRAKE DISC. 300MM. 1.8 TONNE. ALLOY WHEELS. - St. Leonards-on-Sea,United Kingdom (9.99 GBP)
  • GENUINE FIAT DUCATO FRONT BRAKE DISC. 300MM. 1.8 TONNE. ALLOY WHEELS. - St. Leonards-on-Sea,United Kingdom (9.99 GBP)
  • GENUINE FIAT DUCATO FRONT BRAKE DISC. 300MM. 1.8 TONNE. ALLOY WHEELS. - St. Leonards-on-Sea,United Kingdom (4.99 GBP)
  • GENUINE FIAT DUCATO FRONT BRAKE DISC. 300MM. 1.8 TONNE. ALLOY WHEELS. - St. Leonards-on-Sea,United Kingdom (4.99 GBP)

Ask an expert